How to Get on Industrial Automation Podcasts
Get on industrial automation podcasts with a plant-specific decision, a show-matched technical premise, verified access and firm safety, security and customer limits.
Research this article with AI
Follow Convokast on Google
Add Convokast to your Preferred Sources.

Get on industrial automation podcasts by proposing one decision you owned in controls, robotics, integration or plant operations. Match it to a show that covers that work, then use the correct access route. Bring approved evidence and settle customer, safety, security, architecture and vendor boundaries before the producer considers the episode.
Build the premise around a plant or system decision
"Automation expert" is too broad for a producer to assess. The useful premise identifies the system, operating problem, constraints and guest's responsibility. It also shows what another practitioner can learn without exposing protected plant information.
A controls engineer might explain why a team changed a SCADA migration sequence. A system integrator could discuss how ownership and maintenance requirements changed an architecture. A robotics specialist might describe the sensing or test constraint that blocked deployment. A plant leader could explain why a promising automation project was deferred after the business case or operating risk changed.
The story does not need a perfect result. Rejected options and commissioning problems often reveal more judgment than a clean vendor case study. The guest must be authorized to discuss them.
| Proposed guest | Strong episode premise | Weak version |
|---|---|---|
| Controls engineer | Why one migration sequence reduced cutover risk in a defined plant setting | Best practices for SCADA |
| System integrator | How support ownership changed the selected architecture | The future of systems integration |
| Robotics specialist | Why sensing, fixturing or cycle requirements blocked a planned cell | How robots change manufacturing |
| Plant leader | Why an automation project failed the operating or investment case | Why every plant should automate |
| Vendor product lead | What problem the product addresses, where it failed and what users must provide | A product overview presented as education |
Write one sentence with the problem, decision and consequence. If that sentence can be sent unchanged to every automation show, it is still too generic.
Match controls, robotics and platform topics to different shows
The industrial automation podcast shortlist separates seven current formats. Talking Industrial Automation covers integrators, manufacturers, end users and suppliers. Manufacturing Hub connects controls and industrial data to plant operations. The Automation Podcast follows products and vendors. The Robot Industry Podcast focuses on robotics and advanced manufacturing. Automation Ladies combines technical practice with careers. Ignited serves the Ignition ecosystem. Automation World builds episodes around end-user questions.
Read several current episode descriptions. Note recurring technologies, guest roles and depth. A PLC commissioning story may fit Manufacturing Hub but not a broad robotics discussion. An Ignition architecture case needs a real ecosystem connection to fit Ignited. A general leadership biography does not become relevant because the executive's employer sells automation products.
Audience fit is about the people who own the problem. Maintenance, controls, IT, engineering, operations and procurement may all influence the same project while needing different explanations. State which listener the proposed episode helps.
Use the route according to its permission class
The current industrial automation guest-route guide verifies three different public paths.
Automation Ladies publishes a guest intake and a separate Suggest a Guest option. The intake is public, but it asks who invited the proposed guest. Treat it as an intake under the form's conditions, not proof that every cold applicant will be considered. The suggestion form supports nominations. A self-nomination should be disclosed.
Manufacturing Hub remains active, and an official episode page from January 2025 invited future-topic suggestions and guest recommendations through the hosts' and show's LinkedIn routes. That permits a recommendation, not a guaranteed self-application. Keep the date with the access claim and recheck before sending.
The Automation Podcast's feed points vendors toward guest or sponsorship information. The producer's contact page is headed around sponsorship and includes industry interviews among marketing services. Treat it as a commercial vendor-interview inquiry.
Talking Industrial Automation, The Robot Industry Podcast, Ignited and Automation World all use outside experts. Their reviewed first-party sources do not publish an open application or nomination route. A sponsorship address, general contact, newsletter or end-user question form should keep its stated purpose.
Give the producer evidence, not a product claim
Technical detail helps only when its scope is clear. State the plant type, system boundary and operating constraint at a level approved for public discussion. Describe what was measured and by whom. Separate an observed result from a forecast, model or vendor estimate.
A phrase such as "reduced downtime" needs a baseline, period, definition and relevant operating conditions before it becomes a credible result. "Improved visibility" needs the decision or task that changed. "Secure architecture" needs a defined threat and control boundary rather than a broad assurance.
Link to approved public sources. These may include a case study, conference presentation, product documentation, standards material or a public technical article. Tell the producer what the source supports. Vendor documentation alone cannot prove performance at a customer's site.
The guest's role should be equally specific. A vendor may have designed a component while the integrator built the system and the plant owned acceptance. A manager may have approved funding without configuring the controls. Give each party the responsibility it actually held.
Clear plant safety and security boundaries early
Industrial automation stories can expose network architecture, remote-access practices, equipment weaknesses, production data, physical layouts, customer identities and operating incidents. They can also encourage listeners to copy a procedure without the same risk assessment or competence.
Create an approved discussion sheet before outreach. Mark facts as public, approved firsthand experience or restricted. Review it with the plant, customer, safety, security and communications owners who control the information.
Leave credentials, addresses, diagrams and configuration details that increase attack or safety risk out of the interview. Avoid step-by-step field instructions when safe execution depends on isolation, permits, training, protective equipment or site-specific review. Explain the decision and trade-off instead.
Anonymity can fail through combinations. Industry, location, equipment, timing and an unusual failure may identify a plant even when its name is removed. Generalize or replace the example when approval does not cover that combination.
Active incidents, claims and disputes require restraint. Avoid speculation about cause or fault. If the story cannot remain useful without restricted investigation details, choose a different premise.
Disclose vendors, sponsors and demonstrations
Automation media often sits close to vendors because products and integration work are central to the industry. That does not make every interview promotional. It does mean the commercial relationship should be visible.
State when the guest sells the platform, device, service or training under discussion. Identify a customer relationship, sponsorship or partner role. If a vendor funded the test or supplied the measurement, say so. If the appearance is paid, record it as commercial and confirm how disclosure appears.
A demonstration shows what happened under the demonstrated setup. An independent comparison needs a different evidence base, and fit still has to be tested at each plant. A customer result belongs to that customer's environment unless wider evidence supports transfer.
Before buying an interview package, ask who controls the topic, whether the segment is labeled, what distribution is included and whether publication can be declined. Keep that process separate from earned editorial pitching.
Write the proposal for a technical producer
Open with the listener problem and proposed decision. Follow with the guest's role and the setting. Add one sentence on evidence and one on restrictions or commercial interests. Offer questions that expose judgment rather than recite product features.
Good questions ask why an option was rejected, what commissioning revealed, who owned support after handoff and where the lesson stops applying. They give the host room to test the story. A list of broad talking points makes the producer design the episode from scratch.
Keep credentials tied to the premise. Certifications, titles and years in the industry can support authority, but they cannot replace a clear case. Include the most relevant public appearance if it demonstrates that the guest can explain technical work without turning every answer into a sales message.
Prepare for the interview without scripting it
Map likely questions to approved evidence and boundaries. Prepare plain definitions for acronyms. Explain the system context before discussing a result. When the answer depends on a plant-specific assumption, say so.
Use diagrams only when the producer agrees and the owner approves them. Confirm whether video, images or show-note links will be published. Remove sensitive metadata and review the final asset rather than sending an internal slide deck.
The manufacturing and industrial guesting guide covers customer, safety and security preparation beyond the pitch itself.
Follow up only when there is a useful addition
A concise follow-up may provide an approved case study, clarify the technical boundary or offer a more suitable practitioner. Repeating a biography does not improve fit. Follow the show's process and stop after a decline or an unanswered, reasonable sequence.
When the route, premise, evidence and limits are documented, build the industrial automation guest one-sheet the producer can review without searching through a sales deck.
Common questions
How do you get invited onto industrial automation podcasts?
Propose one plant, integration, robotics or controls decision that fits the show's current audience. Show your direct responsibility, provide approved evidence and use the publisher's documented intake, recommendation or commercial route.
Which industrial automation podcasts accept guest pitches?
Automation Ladies publishes a guest intake and nomination option. Manufacturing Hub has invited guest recommendations. The Automation Podcast offers a commercial vendor-interview inquiry. These routes permit different actions and do not guarantee publication.
What should an automation podcast pitch include?
Include the listener problem, system context, guest role, decision, constraints, result, public evidence and limits involving customers, plant security, safety, vendors or confidential architecture.
Can an automation vendor pitch a product demonstration?
Only through a route that permits commercial or product coverage. Disclose the vendor role, distinguish a demonstration from independent evaluation and avoid transferring one site's result to other plants without evidence.
Work with us
Want to be the guest, not the reader?
We pitch, book, and prep you for the shows your buyers already listen to.
Free 20-minute call. If we are not a fit, we will say so.


